Sim-Lab P1X Pro Sim Racing Cockpit

Sim-Lab's 160x40 aluminium cockpit for direct drive wheelbases and high-end pedals.

Uprights on sandwich plates and pre-drilled holes, side mount for shifter or handbrake included
Wheelbase mount variants: front mount, wheel deck or Fanatec DD mount; footprint 1350 x 580 mm

Note! Seat, seat brackets and monitor mount are not included.

Variant

In stock 2 pcs

€800,00 incl. VAT~~€802,00~~

in the Rewards program

Sim-Lab guarantee: 3 years

Commercial guarantee of durability offered by Sim-Lab - free of charge, covering the whole product. Your legal guarantee rights are not affected. Guarantee terms

EU harmonised notice on the legal guarantee of conformity

Business customers: the same manufacturer terms apply to B2B orders.

Sim-Lab P1X Pro - the P1X frame on sandwich plates instead of corner brackets

The Sim-Lab P1X Pro stands on two 1350 mm side rails of 160x40 aluminium profile. Its 120x40 uprights are clamped to the rails between sandwich plates and bolted through holes drilled at the factory, where the original P1X used corner brackets. Every joint has one defined position, which is why Sim-Lab calls the build much easier and quicker.

Footprint 1350 x 580 mm (680 mm at the widest point), height 770 mm, 3-year Sim-Lab warranty.

Sim-Lab P1X Pro - angled upright bolted to the side rail with a Sim-Lab sandwich plate

Front mount or wheel deck - choose by your wheelbase

On the Sim-Lab P1X Pro the front mount holds the wheelbase by its front face, so no deck sits under it and the legs get the most room. Sim-Lab recommends this variant for direct drive wheelbases with front mounting holes, such as the Simucube 3 Sport, Pro and Ultimate and Sim-Lab's own DDS TorqueSync. The wheel deck holds the wheelbase from below and suits almost every base without front holes. Sim-Lab lists the Simagic Alpha EVO only for the wheel deck, not for the front mount. The third variant, Fanatec DD Mount, and the full list per variant are in the Compatibility tab.

Sim-Lab P1X Pro front mount with a direct drive wheelbase and steering wheel on top of the uprights

Technical details and compatibility

Compatibility

Front mount version

Sim-Lab DDS26 TorqueSync™
Sim-Lab DDS39 TorqueSync™
Bodnar 50 series
Lenze MCS12 series
MiGe 130ST (small, big)
Simagic Alpha Mini DD, Ultimate
Simucube 2 & Simucube 3 Sport, Pro, Ultimate
VRS DFP15
VRS DFP20 / uDFP20

Wheel deck version

Sim-Lab DDS26 TorqueSync™
Sim-Lab DDS39 TorqueSync™
Asetek DD wheelbase Forte/Prima/Invicta
AccuForce V1, V2
Conspit ARES (inc. Platinum version)
Fanatec CSL, CSW, CSL-DD, GT DD-PRO, ClubSport DD, ClubSport DD+, DD1, DD2, Podium DD
Logitech G25, G27, G29, G920/G923
Logitech G Pro, RS50
Moza R3, R5, R9 V3, R12 V2, R21 Ultra, R25 Ultra
Thrustmaster T248, T300/TX, T500RS, T-818
Thrustmaster TC-PS, TS-XW, TG-T, TG-T II, T598
Simagic Alpha Evo Sport/Pro
Simucube 3 Sport, Pro, Ultimate

Fanatec DD mount version

Fanatec DD1
Fanatec DD2
Fanatec CSL DD
Fanatec DD Pro
Fanatec ClubSport DD
Fanatec ClubSport DD+
Fanatec Podium DD

Pedals

Sim-Lab XP1
Asetek Invicta & Forte
Asetek La Prima
BJ Steel F1/GT
Cammus pedals
Conspit CPP EVO V2 / CPP Lite
Cube Controls SP-01
Fanatec Clubsport V3, Inverted V3
Fanatec CSL / CSL Elite Pedals LC
Fanatec CSL Pedals V2
Fanatec Elite pedals
Fanatec Podium Pedals
Heusinkveld Pro, Sprint, Ultimate, Ultimate+
Insim Talento
Logitech G25, G27, G29, G920
Logitech Pro Pedals
Logitech G RS
Meca Cup Pedals
Moza CRP, SR-P
Moza CRP2
Moza SR-P Lite
Moza mBooster
PurrPRO
Simagic P1000 Pedals
Simagic P2000 (with baseplate)
SimCoaches P1-3
Simjack UT
SIMSONN pedals
Simtag Iris / Hydraulica
SRP Formula-R V5
Simtrecs ProPedal GT
Simucube Active Pedal
Simucube ActivePedal Ultimate
SimWorkx Pro pedals
Simgrade R7 Pedal Set
Simgrade VX-PRO Pedals
Thrustmaster T300/TX, T-LCM, T3PA
VNM/Venym pedals
VRS DirectForce Pro

Note: the Simagic Alpha EVO fits the wheel deck version only - Sim-Lab does not list it for the front mount.

Manual, downloads and technical detailsManual and technical details

Manual
Sim-Lab P1X Pro assembly manual (PDF)
All Sim-Lab manuals and downloads

Technical Details

Wheelbase mount: front mount, wheel deck or Fanatec DD mount - per selected variant
Side rails: 160x40 aluminium profile, 1350 mm
Uprights: 120x40 aluminium profile, angled, 850 mm
Pedal deck: 160x40 + 80x40 profile, 450 mm wide
Feet: 4 adjustable feet with threaded ball-joint rod
Tools needed (per manual): 5 and 6 mm hex keys, 24 mm wrench, mallet, tape measure
Color: black
Dimensions: 1350 x 580 mm (widest point 680 mm) x 770 mm (L x W x H)
Warranty: 3 years

Monitor mounting - sold separately

Sim-Lab Integrated Vario Monitor Mount - mounts directly on the cockpit
Sim-Lab Freestanding Vario monitor mount - stands independently behind the rig

What's in the box?

Aluminium profiles and mounting materials
Wheel deck mount, front/side mount or Fanatec DD mount - per selected variant
Brackets for the front mount wheelbases
Pedal deck
Side mount for accessories
Bolts for mounting seats
Adjustable feet set

Cart

Sim-Lab P1X Pro Sim Racing Cockpit

Sim-Lab P1X Pro - the P1X frame on sandwich plates instead of corner brackets

Front mount or wheel deck - choose by your wheelbase

Side mount included - shifter or handbrake without a separate stand

Before you order - seat, pedals and the shape of the uprights

Technical details and compatibility

What owners say after weeks of racing