Professional racing simulator steering wheel with black and blue design, featuring multiple buttons for enhanced gaming control.

320 mm of suede for hand-over-hand driving

A round rim is the right shape when the wheel has to move through your hands: catching a slide, winding on lock in a hairpin, or the constant corrections of a gravel stage. The Reparto Corse rim gives the GT Pro V2 a full 320 mm diameter with a 36 mm grip, wrapped by hand in genuine suede tanned in Italy - a surface that stays grippy dry or sweaty and lets the rim slip through your palms when you want it to.

The button box behind it is the same carbon-and-aluminium GT Pro V2 unit used with Cube Controls' other rims, so the wheel still works for GT racing when the rally weekend is over.

Racing simulator setup with a black steering wheel, colorful buttons, and three display screens showing a virtual race track

CubeSet or SimHub - every control your way

Six backlit momentary buttons, two on/off toggles with status LED, two front rotary encoders with RGB rings, two thumb encoders and two multi-directional joysticks with integrated encoders - a GT layout that leaves the thumbs on the rim. Which input does what is assigned in the sim as usual; how the wheel behaves is set in CubeSet, Cube Controls' free software, or through SimHub for telemetry-driven lighting on the buttons and rotaries.

Professional racing gaming steering wheel with paddle shifters and blue detailing on black background

Zero-play magnetic paddles, clutches optional

The V2 shifters were redesigned around ball bearings and adjustable stop ends: no play at rest, a short magnetic throw, and a firm tactile snap you feel through a glove when you are shifting mid-slide with one hand. Choose the 2-paddle version for shifters only, or the 4-paddle version, which adds a clutch pair with stiffer springs and Cube Controls' launch control system for standing starts - clutch and shifter behaviour is then configured in CubeSet.

Professional racing steering wheel with adjustable controls and ergonomic design for immersive racing simulation.

Four hours on battery, or plug the Q-CONN in

The GT Pro V2 runs both ways. Wireless over Bluetooth, a 1,500 mAh LiPo battery gives up to four hours of driving with no cable to route through the quick release; wired, the Q-CONN magnetic connector with its straight-back USB cable snaps on in one move and charges the wheel while you drive. Status LEDs on the box tell you where you stand - blue charged, purple charging, red empty - and an on/off pushbutton on the back saves the battery between sessions.

For more detailed information, you might find this review helpful:

Manual, Downloads and Technical details

Downloads
CubeSet software V1.25 (ZIP)


Technical details:

  • Rim: Reparto Corse Round Suede - handcrafted, genuine suede tanned in Italy, 320 mm diameter, 36 mm maximum grip diameter
  • Button box: aluminium die-cast main body, carbon fiber front plate
  • Inputs: 6 backlit momentary buttons, 2 on/off toggle switches with status LED, 2 front rotary encoders with RGB LED, 2 thumb rotary encoders, 2 multi-directional joysticks with integrated encoder
  • Shifters: zero-play, short-throw magnetic switchless paddles on ball bearings with adjustable stop ends
  • Clutches (4-paddle version): launch control clutch system with stiffer springs, in-software clutch and shifter configuration
  • Connection: dual mode - Bluetooth wireless or wired via Q-CONN magnetic connector with straight-back USB cable
  • Battery: 1,500 mAh LiPo, up to 4 hours of use, integrated charging electronics - charges while driving
  • Status LEDs: blue charged, purple charging, red out of power; on/off pushbutton on the back of the wheel
  • Hub: included - 3-bolt, 1-inch and 70 mm PCD formula pattern
  • Weight: 603 g button box; up to 1,770 g complete depending on the rim
  • Software: CubeSet, SimHub compatible; VR friendly; PC only
  • Warranty: 2 years
Compatibility

Windows PC only Connects over Bluetooth or with the Q-CONN cable to a USB port on the PC. Not compatible with Xbox or PlayStation.


Good to know

  • There is no "SC" or LightBridge version of the GT Pro V2 - it talks to the PC directly, so it works the same way on Simucube 2 and Simucube 3.
  • The hub is in the box, the quick release wheel side is not: Simucube 2 QR wheel side kit for Simucube 2, Link Quick Release for Simucube 3, Simagic QR 70 for Simagic.
  • Wireless mode runs on the battery only - for long endurance stints keep the Q-CONN cable connected; it charges while you drive.


Wheelbase compatibility

The hub fits every formula-style quick release with a 3-bolt, 1-inch or 70 mm PCD pattern:

  • Simucube 2 and Simucube 3
  • Simagic
  • Asetek
  • Fanatec
  • VRS Direct Force, Accuforce, Leo Bodnar, OSW and other 70 mm bases
What is in the package?
  • 1x GT Pro V2 button box in the selected paddle version
  • 1x Reparto Corse Round Suede rim, 320 mm
  • Hub with 3-bolt, 1-inch and 70 mm PCD pattern
  • Q-CONN to USB cable
  • Badge, sticker sheet and assembly accessories
  • Cube Controls bag

Quick release not included - see the Compatibility tab for the matching wheel side for your wheelbase.

What our customers say about this product